News

Pneumatic grease guns are mainly used in oil-changing centers, workshop production lines, metallurgy, papermaking, electronics, power, ports, construction machinery,   automobiles, machinery and equipment, and shipbuilding agricultural vehicles. It is also widely used in the process of door locks, brakes, wipers, seat rails, etc. in the auto   parts industry. It is fatliquoring in the bearing industry before the pressure cap, the gear reduction process of the micro motor industry assembly line, and the gear pair in   the power tool industry. Assembly fatliquoring. It is an indispensable means for enterprises to improve the quality of product assembly.

The failure of the grease gun failure is that the oil can’t be pressed.

This situation needs us to solve:

 In fact, just adding air to our oil guns, this little mistake doesn't know how many inexperienced newcomers are overwhelmed.

 The solution is of course not to add air to the oil gun, but it is also difficult for novices. If it is a harder butter, you can use the suction type to refuel (be careful not   to look at the instructions in the manual to expect to suck the oil up, and Is to pull the rod relatively static and then push down with the gun shell, there is no space in the   middle); if it is very soft oil, I generally do not use this method (of course, it does not object to others). Although it can really suck the oil in but the shell is cut It’s   a gunpowder. When you add a gray knife to the inside, don’t fill it up. You have to add it and leave a passage, so when you put the oil down by hand, the air inside will come   out ( Of course, it is a good choice to carry the oil down by hand.) Some of the techniques for refueling are mentioned above, but in actual use, there may still be air inside   and not too good. At this time, some measures should be taken in a targeted manner.

Use Pistol Grease Gun

   Grease fittings on cars, trucks, ATVs and RVs require the addition of grease to the system at least once a year to keep the parts thoroughly lubricated and in good working order. Several grease fittings are on each vehicle, including the wheel hubs so that the wheels turn fluidly while in operation. A pistol grease gun may use pre-filled cartridges or may load from bulk grease out of a container.

  About Pistol Grease Gun

 1.Push the coupler on the end of the pistol grease gun's extension pipe or hose onto a grease fitting. When the coupler makes contact with the fitting, an internal ball pushes back inside the fitting to allow the introduction of grease into the fittings and lines.

 2.Squeeze the pistol grip to add grease to the fitting. Squeeze the trigger until an excess of grease backflows out of the fitting to signify that the fitting is full.